You wouldn’t expect to run a 10-mile race after spending all winter on the couch drinking beer and eating potato chips. Likewise, too many of us neglect the health of our gas-powered lawn mowers then curse them come spring when they just say no. Here are six ways guaranteed to shorten the life of your mower from Consumer Reports' mowing expert Peter Sawchuk who is just back from conducting our mower tests in Florida.
Consider your mower’s fuel tank the perfect place to store old gasoline. Even without additives, stabilized gasoline will eventually gum up, clog fuel lines, and ruin your carburetor. And gas containing ethanol ages even more quickly. “It’s not so much the ethanol but that it absorbs a lot of water,” says Kris Kiser, president and CEO of the Outdoor Power Equipment Institute, a trade group. “Water in the engine is a killer.”
Smart move: At the end of the season, take 10 minutes to drain the tank or run the engine dry.
Never change or add oil. Moving metal parts need oil, and an engine that’s denied clean oil, and enough of it, will overheat for sure.
Smart move: The best time to do change the oil in a walk-behind mower is when it’s drained of gas—since you’ll need to flip the mower to remove the old oil.
The blades still turn, so forget about sharpening them. Ideally, you should sharpen your mower’s blades monthly—and even more often in the fall if you mulch leaves using your mower. This keeps the engine from working harder and less efficiently than it needs to, which affects its lifespan. But if you indeed forget, the brown-tipped grass will remind you before it dies altogether.
Smart move: You’ll need: A piece of 2x4 to wedge in the blade to keep it from turning (shown in photo) as you remove it. Sharpening costs about $10 if you don’t do it yourself.
Leave in your original air filter year after year. An engine’s carburetor needs to mix the gasoline with filtered air for smooth running, but the bigger hazard in not cleaning or replacing the filter annually is that a dirty or torn filter can allow dirt into the engine, which will accelerate wear and shorten its life.
Smart move: It costs about five dollars for the part and 30 seconds to put it in.
Ignore the engine’s cooling fins, even if they’re clogged with clippings. The cooling fins help distribute heat from the engine, which matters most on hot days. Let grass clippings and dust accumulate on them, and the engine could overheat.
Smart move: Running a whisk broom back and forth over the fins for a few seconds.
Don’t check the lawn for stationary hazards before mowing. Even if you know the location of every metal stake, sprinkler head, or tree stump, you could come upon a thick branch or jutting rock suddenly and hit it with the mower. Doing this with a walk-behind mower can bend the crankshaft. “If you bend the shaft, typically because of the price point of the product, it’s dead," says Kiser. “You’re just not going to get it repaired.”
Smart move: Take short walk and make a visual inspection before you mow.
There’s a seventh way to kill your mower as shown by Milwaukee homeowner Keith Walendowski when he took his shotgun to his Lawn-Boy a few years ago. But technically the mower was already gone—or at least needed a little TLC.
Source: http://news.consumerreports.org/home/2012/03/six-ways-to-kill-a-mower-and-what-to-do-instead.html
Monday, March 12, 2012
Friday, March 9, 2012
How to Fake a Fire and Put Some Spark in the Bedroom
Electric fireplaces are cheap and easy ways to spark a little somethin’ on a cold winter night. Just plug and play. Here’s how they work.
Sparking the mood for love in the bedroom — or any room — is easier than you think with an electric fireplace that ignites romance without a complicated install, high price, or frilly lingerie.
Electric fireplaces have become the fastest-growing segment of the fireplace market. That’s because new technology makes flames look and feel real. Coils and blowers give off enough heat (4,600 to 5,000 BTUs) to warm 400 sq. ft., and add-ons provide the snap and crackle of a real wood fire for as little as $300.
In fact, if you don’t have the budget or structure to support adding a fireplace fueled by wood or gas, you easily can light up with an electric fireplace, which doesn’t need to be vented or surrounded by noncombustible material. In fact, the only thing you need is a 120V outlet.
You can even buy fireplaces-to-go on casters that let you wheel them throughout the house. And if you’ve got money to burn, you can buy elaborate mantle packages that boost the price to $2,000. You can buy electric fireplaces at big-box stores and fireplace specialty stores.
But even with all the bells and whistles, you won’t be spending near the $7,000 that a comparable gas fireplace would cost to install.
With those savings, you can buy some champagne and get something waxed. (There’s only so much a fireplace can do.)
Read more: http://www.houselogic.com/blog/fireplaces-chimneys/fake-fire-portable-electric-fireplace/#ixzz1oSdf6ZgF
Sparking the mood for love in the bedroom — or any room — is easier than you think with an electric fireplace that ignites romance without a complicated install, high price, or frilly lingerie.
Electric fireplaces have become the fastest-growing segment of the fireplace market. That’s because new technology makes flames look and feel real. Coils and blowers give off enough heat (4,600 to 5,000 BTUs) to warm 400 sq. ft., and add-ons provide the snap and crackle of a real wood fire for as little as $300.
In fact, if you don’t have the budget or structure to support adding a fireplace fueled by wood or gas, you easily can light up with an electric fireplace, which doesn’t need to be vented or surrounded by noncombustible material. In fact, the only thing you need is a 120V outlet.
You can even buy fireplaces-to-go on casters that let you wheel them throughout the house. And if you’ve got money to burn, you can buy elaborate mantle packages that boost the price to $2,000. You can buy electric fireplaces at big-box stores and fireplace specialty stores.
But even with all the bells and whistles, you won’t be spending near the $7,000 that a comparable gas fireplace would cost to install.
With those savings, you can buy some champagne and get something waxed. (There’s only so much a fireplace can do.)
Read more: http://www.houselogic.com/blog/fireplaces-chimneys/fake-fire-portable-electric-fireplace/#ixzz1oSdf6ZgF
Thursday, March 8, 2012
Garage Doors With the Look of Wood at a Budget Price
In our ongoing “Why You Should Fake It” series, we look at garage doors that give you the look of wood at a price point that’s easier to swallow.
Money’s tight these days, but your desire for nice things needn’t be stifled. That’s why we’ve been examining faux products in our “Why You Should Fake It” series.
Today’s topic: Fiberglass garage doors with the deluxe look of wood for a get-real price.
New die technology lets fiberglass doors mimic wood grains so closely that only a professional eye can tell the difference. But unlike wood, which is vulnerable to heat and water and must be painted or stained every few years, pre-finished fiberglass garage doors are impervious to the elements and require almost no maintenance.
Other plusses of fiberglass garage doors:
Although the energy efficiency of insulated fiberglass and insulated wood doors are practically the same, the initial cost can be worlds apart.
Most 16-by-7-foot fiberglass doors cost about $1,800 installed, while hardwood doors start around $2,500 to $3,000, then zoom up from there depending on wood and style. Your local garage door contractor can help you explore your faux door options.
What’s the downside of fiberglass garage doors? They can crack with age and are more expensive than other low-maintenance options, such as steel garage doors ($750 to $1,200).
Read more: http://www.houselogic.com/blog/garages/price-garage-doors/#ixzz1oScf6ks6
Money’s tight these days, but your desire for nice things needn’t be stifled. That’s why we’ve been examining faux products in our “Why You Should Fake It” series.
Today’s topic: Fiberglass garage doors with the deluxe look of wood for a get-real price.
New die technology lets fiberglass doors mimic wood grains so closely that only a professional eye can tell the difference. But unlike wood, which is vulnerable to heat and water and must be painted or stained every few years, pre-finished fiberglass garage doors are impervious to the elements and require almost no maintenance.
Other plusses of fiberglass garage doors:
- Won’t warp, rot, or rust
- Insect-proof
- Lightweight
- Available in many prefinished colors
- You can paint them (but you’ll have to repaint every couple of years or so)
Although the energy efficiency of insulated fiberglass and insulated wood doors are practically the same, the initial cost can be worlds apart.
Most 16-by-7-foot fiberglass doors cost about $1,800 installed, while hardwood doors start around $2,500 to $3,000, then zoom up from there depending on wood and style. Your local garage door contractor can help you explore your faux door options.
What’s the downside of fiberglass garage doors? They can crack with age and are more expensive than other low-maintenance options, such as steel garage doors ($750 to $1,200).
Read more: http://www.houselogic.com/blog/garages/price-garage-doors/#ixzz1oScf6ks6
Wednesday, March 7, 2012
Will Zip Codes Zip You to a New Home?
For people in the first stages of their Evansville real estate search, entering a 5-number zip code seems to anchor almost every step of the way. That’s a quick way for computer databases like the MLS to direct searches, but there are some not-so-apparent facts about zips that it’s good to keep in mind.
School district
Those of us who spend our professional lives assisting others to buy and sell homes in Southwest Indiana know it to be true. Many future homebuyers – even those who currently don't have children -- base much of their search direction on the type and quality of nearby schools. Families want the option of being able to settle down, and most hope to be within hailing distance of good schools. But zip codes can exist in more than one school district, and many neighborhoods have more than one zip code! Add to that the fact that a given school district may have schools of varying quality and it becomes clear that zip code = school quality is not necessarily a valid real estate equation.
Taxes
We all know that different towns have different tax ordinances, which might lead one to assume that taxes can be approximated by zip code. Not! Within a single zip code there can be different area ratings that influence property values. Proximity to water is frequently such a factor, and it can be significant.
Zip Grab Bag
Cities and towns have different zip code overlays: multiple town names may be included in a single zip, and many zips can share the same town name. Zip codes can direct a real estate search toward a general area, but as for being certain that it describes the place you are thinking of -- not so fast! A single zip’s radius can cover anything from Alaska’s amazing 99756 (roughly the size of California) to those metropolitan codes that cover just one building.
It’s the Neighborhood!
Getting serious about any Evansville real estate home search means going well past simple online zip code entry. It means being familiar with neighborhoods. Neighborhood is a vague term because it encompasses the human factors: some are appropriate for young couples, featuring trendy shops and nightlife; others are more family-oriented with parks, playgrounds, and family-friendly dining options. These factors are not dependably tied to the five-number zip codes that govern most web searches.
The National Association of Realtors tells us that the average homebuyer spends 12 weeks looking for a new home -- and actually views a dozen of them. My office is here in Evansville to help you with your actual neighborhood searches. You can bet that they will be the ones that count! You can reach me on my cell phone at 812-499-9234 or by email Rolando@RolandoTrentini.com
Tuesday, March 6, 2012
Smartphones May Increase Your Identity Theft Risk
Your smartphone may be putting you at increased risk for identity fraud, according to a new report issued by Javelin Strategy & Research.
According to the report, nearly 12 million Americans last year became victims of identity theft, an alarming 13 percent increase over 2010 numbers. Seven percent of those victims came from using the smartphone, the report says.
The report blamed smartphones and social media for making more Americans vulnerable to identity theft. The report says that Americans tend to be less cautious when using their smartphone or logged onto social media sites. Letting their guard down and not taking safety precautions can easily make them a target.
Sixty-two percent of smartphone users were found to not password protect their home screens, according to the report. As such, if you happen to misplace your phone, anyone can gain access to the device if you do not have a password on it.
Smartphone users also need to be careful about what apps they download. Some apps can contain viruses or can compromise your personal information. The report says services such as iTunes monitors apps and is a safer place to download apps than directly from a Web site page.
As for social media users, they can increase their chances of identity theft by revealing too much personal information online. For example, social media users should be more cautious about revealing information such as birth dates, where they went to high school, phone numbers, and additional personal information.
The report also warns Americans to be careful when you log onto a public wifi network and be cautious about the information you share, which may be more at risk.
Source: “Rise in Identity Fraud Tied to Smartphone Use,” Reuters News (Feb. 22, 2012)
According to the report, nearly 12 million Americans last year became victims of identity theft, an alarming 13 percent increase over 2010 numbers. Seven percent of those victims came from using the smartphone, the report says.
The report blamed smartphones and social media for making more Americans vulnerable to identity theft. The report says that Americans tend to be less cautious when using their smartphone or logged onto social media sites. Letting their guard down and not taking safety precautions can easily make them a target.
Sixty-two percent of smartphone users were found to not password protect their home screens, according to the report. As such, if you happen to misplace your phone, anyone can gain access to the device if you do not have a password on it.
Smartphone users also need to be careful about what apps they download. Some apps can contain viruses or can compromise your personal information. The report says services such as iTunes monitors apps and is a safer place to download apps than directly from a Web site page.
As for social media users, they can increase their chances of identity theft by revealing too much personal information online. For example, social media users should be more cautious about revealing information such as birth dates, where they went to high school, phone numbers, and additional personal information.
The report also warns Americans to be careful when you log onto a public wifi network and be cautious about the information you share, which may be more at risk.
Source: “Rise in Identity Fraud Tied to Smartphone Use,” Reuters News (Feb. 22, 2012)
Monday, March 5, 2012
Make A Home Emergency Preparedness Kit
Make a home emergency preparedness kit with all the essential supplies to aid you in case a disaster strikes your area.
Read more: http://www.houselogic.com/home-advice/emergency-preparedness/make-home-emergency-preparedness-kit/#ixzz1ncZcTjyB
Putting together a home emergency preparedness kit you hope never to use may seem like a waste of time and money. But when disasters happen that are beyond your control, you can take charge of how you respond.
Items for an emergency preparedness kit
Store all items in an easy-to-carry bag or suitcase that’s readily accessible. Make sure everyone in the family knows where it is and what it contains. If you need to evacuate your home quickly, here are the essentials you’ll need for a basic “grab and go” kit:
Along with the basics like food and water, it’s important to have what you need for your particular situation. You may not need extra blankets in southern California, but you do need escape ladders in case of wildfire. And you’ll want extra blankets to survive a winter power outage in Maine.
Update your emergency preparedness kit regularly
Replace all food and water approaching its expiration date. Replace batteries. You might pick a specific time each year to check, such as before hurricane season in the south or after Thanksgiving if you live in the north.
Buy a pre-made kit
As an alternative to making your own kit, you can buy a fully stocked kit from the American Red Cross. A kit with a three-day supply of essentials for one adult costs $50 to $70.
Store all items in an easy-to-carry bag or suitcase that’s readily accessible. Make sure everyone in the family knows where it is and what it contains. If you need to evacuate your home quickly, here are the essentials you’ll need for a basic “grab and go” kit:
- Water: One gallon per person per day for at least three days, for drinking and sanitation; double if you live in a very hot climate, have young kids, or are nursing. Bottled water is best, but you can also store tap water in food-grade containers or two-liter soda bottles that have been sanitized. Factor in your pet’s water needs, too.
- Food: At least a three-day supply of non-perishables and a can opener. Pack protein, fruit, and vegetables, but make sure they’re in a form you actually like—it’s bad enough not to have access to fresh food without also having to subsist on nothing but canned tuna. Include treats like cereal bars, trail mix, and candy bars. Store food in pest-proof plastic or metal tubs and keep it in a cool, dry place.
- Flashlights and extra batteries: Candles are not recommended because there are many house fires caused by candles left unattended.
- First-aid supplies: Two pairs of sterile gloves, adhesive bandages and sterile dressings, soap or other cleanser, antibiotic towelettes and ointment, burn ointment, eye wash, thermometer, scissors, tweezers, petroleum jelly, aspirin or non-aspirin pain reliever, and stomach analgesics such as Tums or Pepto-Bismol, and a laxative.
- Sanitation and hygiene supplies: Moist towelettes in sealed packets, paper towels, toilet paper, garbage bags, and plastic ties. You might also want travel-size shampoo, toothpaste/toothbrush, and deodorant.
- Radio or TV: Keep a portable, battery- or crank-operated radio or television and extra batteries to remain connected in case the power goes out, as well as an extra cell phone charger. You can buy an emergency radio online from the Red Cross.
- Helpful extras: Duct tape, dust masks, a signal whistle, toys for kids.
- Cash: Have at least $100 in your kit.
Along with the basics like food and water, it’s important to have what you need for your particular situation. You may not need extra blankets in southern California, but you do need escape ladders in case of wildfire. And you’ll want extra blankets to survive a winter power outage in Maine.
Update your emergency preparedness kit regularly
Replace all food and water approaching its expiration date. Replace batteries. You might pick a specific time each year to check, such as before hurricane season in the south or after Thanksgiving if you live in the north.
Buy a pre-made kit
As an alternative to making your own kit, you can buy a fully stocked kit from the American Red Cross. A kit with a three-day supply of essentials for one adult costs $50 to $70.
Read more: http://www.houselogic.com/home-advice/emergency-preparedness/make-home-emergency-preparedness-kit/#ixzz1ncZcTjyB
Friday, March 2, 2012
8 Tips for Cleaning Up a Broken CFL Bulb
You dropped and broke a CFL bulb. No need to call a Haz Mat team — just keep a cool head and follow these 8 tips.
Read more: http://www.houselogic.com/home-advice/lighting/broken-cfl-clean-up/#ixzz1ncYW3mmv
A broken compact fluorescent bulb isn’t cause for panic, but it is cause for concern. CFLs and other fluorescent bulbs typically contain a small amount of mercury, which can turn into dangerous mercury vapor if the bulb breaks.
Cleaning up and disposing of a broken CFL properly is important, especially if you have young children, you’re pregnant, or the bulb breaks on a carpet.
Don’t reach for the broom to sweep it up. That’ll disperse the mercury; your goal is to keep the mercury in one place and remove it.
Follow these 8 steps to clean up and dispose of any CFL bulbs that break:
Step 1: Contain the damage
Stay out of the room for 5 to 15 minutes to give the mercury enough time to settle into little balls, but not long enough to disperse. Meanwhile, collect:
Look closely at the area where the CFL broke for any remaining powder, pieces of glass, or mercury balls. If you see any, repeat Step 3.
You may vacuum the area, but use only the hose attachment and pay special attention to the disposal techniques in Step 5.
Did your CFL break onto a carpet? If you have small children who crawl or play on the carpet, you may want to replace the area of carpet where the CFL bulb broke. A Maine Deparment of Environmental Protection Agency study says residule mercury left behind after you clean the carpet can be released as vapor when children play or sit on the carpet.
You can avoid the problem entirely by using only LED or halogen bulbs in rooms where your kids play or sleep, and in your bedroom while you’re pregnant. Also, make sure you’re using CFLs appropriately to keep them from burning out too soon.
Step 5: Take out the trash
Step 6: Clean yourself
Your sealed waste container and contaminated trash need to go to a universal waste facility that handles all types of trash, including environmentally sensitive materials.
Ask local government officials where to find one in your area.
Step 8: Continue to air out the room
Continue to air out the room and leave the HVAC system off several hours, or as long as that’s practical given the outdoor temperatures. If the CFL bulb broke on carpet, open the windows when you vacuum for the next few weeks in case vacuuming releases any mercury you didn’t already get out of the rug.
Don’t reach for the broom to sweep it up. That’ll disperse the mercury; your goal is to keep the mercury in one place and remove it.
Follow these 8 steps to clean up and dispose of any CFL bulbs that break:
Step 1: Contain the damage
- Get people and pets out of the room.
- Open the windows to let in fresh air.
- Shut the door to the room and turn off your forced-air heat or AC to keep mercury vapors from traveling elsewhere in your home.
- Avoid stepping on the broken glass or mercury powder as you leave the room.
Stay out of the room for 5 to 15 minutes to give the mercury enough time to settle into little balls, but not long enough to disperse. Meanwhile, collect:
- disposable rubber gloves
- duct tape
- a piece of stiff paper or thin cardboard
- a few damp paper towels or baby wipes
- a sealable container — a glass jar with a lid (best), a plastic jar with a lid (OK), or a zipper plastic bag (better than nothing)
- Put on the gloves and pick up the big pieces of broken glass.
- Use the stiff cardboard to scoop up the smaller pieces.
- Use the sticky side of the duct tape to pick up the smallest shards.
- Wipe the area with your paper towels or baby wipes.
- Put the broken CFL pieces, the cardboard, and the wipes in your container and seal it.
Look closely at the area where the CFL broke for any remaining powder, pieces of glass, or mercury balls. If you see any, repeat Step 3.
You may vacuum the area, but use only the hose attachment and pay special attention to the disposal techniques in Step 5.
Did your CFL break onto a carpet? If you have small children who crawl or play on the carpet, you may want to replace the area of carpet where the CFL bulb broke. A Maine Deparment of Environmental Protection Agency study says residule mercury left behind after you clean the carpet can be released as vapor when children play or sit on the carpet.
You can avoid the problem entirely by using only LED or halogen bulbs in rooms where your kids play or sleep, and in your bedroom while you’re pregnant. Also, make sure you’re using CFLs appropriately to keep them from burning out too soon.
Step 5: Take out the trash
- Take the zipper bag or glass jar right out to the trash.
- Toss out anything else the CFL broke on, such as bedding, fabrics, and clothing.
Step 6: Clean yourself
- If bits of glass or mercury got onto your shoes, use a towel or wipe to clean your shoes, then dispose of the wipe.
- If mercury got onto your clothes, toss them out.
- Wash your hands with soap and water.
Your sealed waste container and contaminated trash need to go to a universal waste facility that handles all types of trash, including environmentally sensitive materials.
Ask local government officials where to find one in your area.
Step 8: Continue to air out the room
Continue to air out the room and leave the HVAC system off several hours, or as long as that’s practical given the outdoor temperatures. If the CFL bulb broke on carpet, open the windows when you vacuum for the next few weeks in case vacuuming releases any mercury you didn’t already get out of the rug.
Read more: http://www.houselogic.com/home-advice/lighting/broken-cfl-clean-up/#ixzz1ncYW3mmv
Subscribe to:
Posts (Atom)